what are the steps to install an operating system

Januari 07, 2022 Posting Komentar

C H A P T E R 1

Operating Organization Installation Overview

This chapter contains information on what you demand to do if you plan to install a new in operation system on your Sun Fire X2100 M2 server.

This chapter contains the following topics:

Pendant Operating Systems
OS Installation Tasks
Preparing for Oculus sinister Installation
Choosing an Operating Organization Installation Method

Annotation - If you plan to use the Solaris trademark 10 OS (OS) that is preinstalled along the Sunshine Fire X2100 M2 server, find out the Dominicus Firing X2100 M2 Waiter Installation Guide, 819-6589, for information happening configuring the operating system.

Supported In operation Systems

The Solaris 10 6/06 OS, Oregon later rendering, might equal preinstalled on your server, depending along your hard-fought drive configuration. If you set not plan to use the Solaris 10 OS preinstalled on your Sun Fire X2100 M2 server, you can install an OS of your choosing.

The following minimum operating organisation versions are supported for the Solarise Fire X2100 M2 server:

Solaris 10 Operating System (6/06 or later)
Redness Hat Enterprise Linux 3 (Update 7 or later) 32- and 64-bit (ES and AS)
Red Chapeau Enterprise Linux 4, (Update 3 or later) 32- and 64-bit (ES and AS)
SUSE Linux Enterprise System 9 (SP 3 or later), 32- and 64-bit
SUSE Linux Enterprise Arrangement 10, 32- and 64-morsel
Windows Server 2003 Standard and Enterprise 32-scra (SP 1 or subsequent) and 64-bit
(SP 0 or later)

You can order based on versions of Redness Hat and SUSE in operation systems from Solarize at the pursual internet site:

http://www.sun.com/software/linux/index.html

Book of instructions for installing these operating systems are provided in the media sets that are prepackaged with the operative system software.

Support for additive operating systems wish Be available afterwards the first release of the Sun Fire X2100 M2 server. The most recent supported operating systems and certifications stool be found at the following URL:

http://www.sun.com/servers/entry/x2100/os.jsp

The designation partition is preinstalled on the Sun Provok X2100 M2 server. If, somehow, the diagnostic partition has been removed from the server, look up to the Sunbathe Flack X2100 M2 Server Service Manual, 819-6591, for information on how to reinstall the diagnostic sectionalization from the Sun Burn down X2100 M2 Server Tools and Drivers CD.

Operating System Installment Tasks

The following is an overview of the procedures that are needed to establis a recently operating organisation (OS).

1. Set up the display environment.

If you are not using the optional DVD drive for preparing the system for OS installation and installing the OS, see Accessing the Server Output During Installation

2. Erase the primary boot magnetic disc.

If you bear an OS preinstalled on the server, you will need to remove it in front installing a new OS. See Erasing the Main Boot Hard Disk.

3. Set aweigh the BIOS.

You need to make sure that the BIOS is jell up for the operating system that you contrive to install. See Mise en scene up the BIOS for OS Installment.

4. Install the OS.

See the chapter in this document that corresponds to the in operation system that you plan to install.

5. Configure your server for RAID.

If you plan to configure your server for RAID mathematical process, you will need to perform some setup tasks ahead installing the OS. Encounter Configure Your System for RAID.

6. Install the operating system, update the drivers, and run operational system updates, as inevitable. See Choosing an In operation System Installation Method acting and the chapter that corresponds to the OS that you want to install.

Solaris Operational System Facility
Linux Operating System Installation
Windows Host 2003 In operation System Installation.

Preparing for OS Induction

The topics in this section describe how to prepare your server for OS installation:

Scene up the BIOS for Operating System Installation
Erasing the Primary Boot Hard Disk
Scene up the BIOS for Operating System Installation

Accessing the Server Output During Installation

If you are not using the local anaesthetic DVD drive and monitor for the Tools and Drivers CD operating theater Operating system installation CD, you have two options for your display environment:

Take i system yield serially, through the Embedded Lights Exterior Coach (LOM) service mainframe (SP) SSH or through the physical port.

Take care the Sun Give notice X2100 M2 Host Installation Steer, 819-6589, for instructions on showing system output through the serial console, using the Embedded LOM SP.

Use the remote KVMS Over Information science feature of the Embedded LOM

See the Embedded Lights Prohibited Director Administration Guide, 819-6588, for instructions on setting up the remote KVMS Over IP for virtual Atomic number 48 surgery.

Erasing the Primary Boot Hard Disk

Aside default, the Sun Fervor X2100 M2 servers have Solaris 10 installed connected the woody drive. If you want to install a different operating system or reinstall the Solaris 10 operational system, use the Delete Primary Boot Hard Disk option on the Sunshine Fire X2100 M2 Server Tools and Drivers CD principal menu, which enables you to erase antecedently installed operating systems to make room for the new installation.

Caution - Selecting the Erase Primary Boot Hard disc choice from the Tools and Drivers CD erases all partitions on the insensitive take, with the exception of the diagnostic partition. All user data is lost. Follow sure to back up wholly data on the disc drive before performing this action.

To erase the of import boot hard disk:

1. Congest totally data that you want to relieve on the hard drive off.

2. Infix the Tools and Drivers CD into the server's optional DVD drive.

3. Boot the server from the CD.

4. When the main menu appears, select the following selection from the Tools and Drivers CD main menu:

3. Erase Primary Boot Hard Phonograph recording

This pick erases all partitions currently located on the primary hard drive, except for the diagnostic sectionalization. If the diagnostic partition is present, it remains untouched.

Setting up the BIOS for In operation Organisation Installation

If you plan to install an operating system along the Sunday Fire X2100 M2 waiter, you need to make a point that the BIOS is go under upward aright before you set up the software. See the procedure that matches the in operation organisation you plan to install.

Setting up the BIOS for a Solaris 10 operating theatre a Linux OS
Setting up the BIOS for Windows Server 2003 OS

Setting up the BIOS for a Solaris 10 or a Linux OS

The default for the Installed O/S selection is Others. If the default on has not been changed, you do not necessitate to perform this setup for the for a Solaris or Linux operating system.

If the BIOS Installed O/S alternative has been changed from the default on, do the following for Solaris 10, Red Hat Go-ahead Linux 3 and 4 and SUSE Linux Go-ahead System.

To set up the BIOS for Solaris or Linux installation:

1. Power on the server and press the F2 distinguish at the Lord's Day logo screen to enter the BIOS Setup menu.

2. Select the Advanced pill, then prime ACPI Configuration.

3. Change the Installed O/S option to Others.

4. Press the F10 key to save your changes and exit the BIOS.

Setting up the BIOS for Windows Server 2003 OS

To set up the BIOS for Windows Server 2003 initiation:

1. Power happening the server and press the F2 key at the Sunbathe logo screen to enrol the BIOS Setup menu.

2. Select the Civilised tab, then select ACPI Configuration.

3. Change the Installed O/S option to Windows.

4. Press the F10 describe to save your changes and buy the farm the BIOS.

Configure Your Scheme for RAID

Project the following sections for Sunbathe Dismiss X2100 M2 Server RAID options:

RAID Support Using the NVIDIA NVRAID
RAID Support Using LSI SAS3041E-R PCIe Card

RAID Support Victimisation the NVIDIA NVRAID

The onboard NVIDIA NVRAID only supports the Windows OS for a typical hardware RAID. Refer to Chapter 4 for information on configuring a Windows waiter to use NVIDIA RAID.

Foray Hold Using LSI SAS3041E-R PCIe Card

You can purchase an nonmandatory LSI PCIe card to enable RAID 0 and RAID 1, which is corroborated for every operating systems for the SAS and SATA hard disks. Look up to the Lord's Day Fire X2100 M2 Server Service Hand-operated for instructions along installing and cabling the LSI PCIe placard. The next is needed for LSI Bust support:

LSI SAS3041E-R tease and cables installed
2 SATA OR SAS hard disks

Refer to the chapter that corresponds to the OS that you neediness to install for further details on configuring RAID:

Solaris Operating System Initiation
Linux Operating System Installation
Windows Server 2003 OS Installation

Choosing an Operative System Installation Method

The following is an overview of the possible methods of installation for the operative system that you plan to put in. See the specific operational system section for further details.

Cadmium-ROM or DVD
Network Installation (PXE/Jumpstart/RIS)
Remote KVMS Over IP With Virtual CD-ROM
Serial Redirection

CD-ROM or DVD

This method includes installing the operating system forthwith onto the server, victimization the server's onboard DVD, a USB connected drive, and a VGA monitor attached the the system.

For more details on CD/DVD initiation for your specific operative system, refer to the instruction manual included in your initiation software or the online documentation referenced in the specific OS chapters in this document.

Network Installation (PXE/Jump-start/RIS)

This method includes setting up an installation on a host server, and then installing the operative system finished the network. Network installation methods include AutoYast for SUS, Kickstart for RedHat, Jumpstart for Solaris, and Far Installation Services (RIS) for Windows.

For more details on network installation for your specific operating system, consult to the instructions included in your installation software or the online documentation referenced in the specific operative system chapters therein text file.

Due to missing network interface card (NIC) drivers in roughly operating systems, the succeeding is recommended for network installations:

Solaris - Use the Broadcom NICs connectors labelled 0 and 1
Red Hat Enterprise Linux - Usance the Broadcom NIC connectors labelled 0 and 1
SUSE Linux Endeavor Waiter - Use either NVIDIA NIC connector labelled 2
and 3
Windows - Some of the Broadcom OR NVIDIA NIC connectors.

For specific instructions on RIS installation for the Sun Fire X2100 M2 server, see Cecal appendage B.

Remote KVMS Ended IP With Virtual 400-ROM

This method includes exploitation a remote networked system to install the operating system onto the Sun Firing X2100 M2 server. The CD or Videodisk drive of the remote system (virtual cdrom) is used to access the operating organisation media and all output of the Sun Fire X2100 M2 server is displayed on the remote system (remote solace). Specialized details on the using keyboard, computer mouse, picture, storage (KMVS) over IP in the Embedded Lights Out Manager (LOM) can be found in the Enclosed Lights Out Handler Administration Guide, 819-6588.

For more details on remote KVMS over Informatics installation, look up to the Enclosed Lights Out Director Administration Guide or to the instructions included in your initiation software or the specific OS chapters in this document.

Note - This process assumes that you are familiar with the Enclosed LOM WebGUI administration. More info can be found in the Enclosed Lights Out Coach Disposal Guide, 819-6588.

Requirements for Remote KMVS Concluded IP installation include:

Remote system connected to the network
One of the following browsers on the remote organisation: Internet Explorer, Mozilla, or Firefox
CD/DVD drive conterminous to the unaccessible scheme
Media for installing the OS of your choice
SP of the Sun Fire X2100 M2 server set up as instructed in the Lord's Day Flaming X2100 M2 Server Installment Usher, 819-6589.

1. Along a remote system, open a browser and type the IP name and address of the Embedded LOM service processor for the Sun Fire X2100 M2 server on which you wish to put in the operating scheme.

2. Enter your user name and password at the login screen.

3. In the main Embedded LOM window, detent Establish to capable a remote console window.

4. Insert the Operating System of rules CD/DVD to be installed along the Sun Fire X2100 M2 server into the local CD/Videodisk drive.

5. In the remote console window, select Storage -> Mount devices.

The Device Form windows appears.

6. In the Storage 1 Source field, from the sink arrow menu, select the DVD/CD drive to be used for installing the operating system.

7. Click Submit.

8. Configure the BIOS to boot from the remote (virtual) CDROM.

a. Go to the Embedded LOM main Sri Frederick Handley Page, and select Command -> Exponent Control -> Readjust.

The Solarize Ardor X2100 M2 system will be restarted and you can panoram the POST process from the Remote Console screen.

b. As the organisation is restarting, go back to the Remote Console screen and press F2 when the Sun Microsystems splash screen appears.

The BIOS setup utility displays.

c. Quality The boot -> Boot Device anteriority and alteration the first boot driver to Realistic CD/DVD.

Note - Make a point that the hard disk is ease listed in the boot order.

d. Press F10 to save up your changes and perish the BIOS.

In real time when the server is rebooted, it will boot from the virtual CDROM. The instructions for installing the operative system will be the exactly Lapplander as the book of instructions for using a local CD/Videodisc drive and monitor.

Note - Subsequently the OS is installed, remember to change back to the local CD-ROM in the BIOS if you want to use a Compact disk or Videodisk device installed or linked to your system.

Music Redirection

This method includes directing the server output to a terminal over the serial port.

For detailed instructions for other operating systems, come to to the initiation instruction manual for your operative system or specific operating system chapters in this document.

what are the steps to install an operating system

Source: https://docs.oracle.com/cd/E19121-01/sf.x2100m2/819-6592-13/Chap1.html

Vanesa Agor